Aquila Favonia [3D Printing STLs]
This listing is for the 3D printing files for the gorgeous Aquila Favonia sword from Genshin Impact! Please note that these are DIGITAL files only - you will NOT receive a physical product.
The model comes pre-sliced to fit onto a 20cm x 20cm x 20cm (minimum) printer bed size. It is split into 11 individual pieces, and the overall length of the final sword measures approximately 1.15m. The full unsplit model is also now included with the files.
The model is designed for a 6mm diameter metal rod, length of 90mm, to run through the hilt/handle to provide strength. The hilt/wings are also designed to fit together using 6mm wooden dowels, length of 4mm each.
Once printed this sword is VERY fragile, so I would highly recommend including the metal rod as well as coating the whole sword in XTC-3D during priming.
This listing is for the 3D printing files for the gorgeous Aquila Favonia sword from Genshin Impact! Please note that these are DIGITAL files only - you will NOT receive a physical product.
The model comes pre-sliced to fit onto a 20cm x 20cm x 20cm (minimum) printer bed size. It is split into 11 individual pieces, and the overall length of the final sword measures approximately 1.15m. The full unsplit model is also now included with the files.
The model is designed for a 6mm diameter metal rod, length of 90mm, to run through the hilt/handle to provide strength. The hilt/wings are also designed to fit together using 6mm wooden dowels, length of 4mm each.
Once printed this sword is VERY fragile, so I would highly recommend including the metal rod as well as coating the whole sword in XTC-3D during priming.
This listing is for the 3D printing files for the gorgeous Aquila Favonia sword from Genshin Impact! Please note that these are DIGITAL files only - you will NOT receive a physical product.
The model comes pre-sliced to fit onto a 20cm x 20cm x 20cm (minimum) printer bed size. It is split into 11 individual pieces, and the overall length of the final sword measures approximately 1.15m. The full unsplit model is also now included with the files.
The model is designed for a 6mm diameter metal rod, length of 90mm, to run through the hilt/handle to provide strength. The hilt/wings are also designed to fit together using 6mm wooden dowels, length of 4mm each.
Once printed this sword is VERY fragile, so I would highly recommend including the metal rod as well as coating the whole sword in XTC-3D during priming.
![Mistsplitter Reforged [3D Printing STLs + Tutorial Bundle]](https://images.squarespace-cdn.com/content/v1/649d441e8d1459364bbceac3/1690451095512-3HQHZATG5EOI1KAD32WA/Mistsplitter+Reforged+Full+Bundle.jpg)
![Azura's Blessed Lance [3D Printing STLs]](https://images.squarespace-cdn.com/content/v1/649d441e8d1459364bbceac3/1690652350811-9YY92EN747T9RS6Y1EH6/Blessed+Lance+Product+Image.png)
![Xiphos' Moonlight [3D Printing STLs + Tutorial Bundle]](https://images.squarespace-cdn.com/content/v1/649d441e8d1459364bbceac3/1696267138089-XIJOLOWIUW2LFTX303H5/Xiphos%27+Moonlight+FULL.jpg)
![Deep Aqua Mirror [3D Printing STLs + Tutorial Bundle]](https://images.squarespace-cdn.com/content/v1/649d441e8d1459364bbceac3/1696268035304-06YV8L84VLGH3OBPZNGG/Deep+Aqua+Mirror.jpg)
